Cyclone Mini F405 F4 / Mini F4 35A ESC 400mW VTX 2-6S Mini Stack 20mmx20mm for RC Drone FPV Racing Freestyle Toothpick Tinywhoop

Cyclone Mini F405 F4 / Mini F4 35A ESC 400mW VTX 2-6S Mini Stack 20mmx20mm for RC Drone FPV Racing Freestyle Toothpick Tinywhoop
  • Cyclone Mini F405 F4 / Mini F4 35A ESC 400mW VTX 2-6S Mini Stack 20mmx20mm for RC Drone FPV Racing Freestyle Toothpick Tinywhoop
  • Cyclone Mini F405 F4 / Mini F4 35A ESC 400mW VTX 2-6S Mini Stack 20mmx20mm for RC Drone FPV Racing Freestyle Toothpick Tinywhoop

Cyclone Mini F405 F4 / Mini F4 35A ESC 400mW VTX 2-6S Mini Stack 20mmx20mm for RC Drone FPV Racing Freestyle Toothpick Tinywhoop


  • Product No.: 2021821905

Details

 Cyclone 20x20mm Mini F405 F4 35A ESC 400mW VTX 2-6S Mini Stack for RC Drone FPV Racing Freestyle Toothpick Tinywhoop Cinewhoop


Product parameters
■ Small cyclone separator BLS U 35AV2.1 2-6S 4-in-1 electronic stability control system
The newly developed BLHELI_ S 35A V2.14 in 1 miniature electronic stability control
High system integration, greatly reduced than standard size, excellent performance, support 6S,
The target is J-H-30. Support DSHOT, MULTISHOT, ONESHOT, etc.,
The pad is half-expanded, saving space and being durable. feature:
■ EFM8BB21F16G single chip microcomputer, fast remelting; increase capacitor to reduce power
Noise; electronic stability control system with BLHELI_ firmware
Support 2-6S voltage input, 4PWM input
Compact size 31 * 31MM, ultra light 6.1G
Support ONESHOT125, ONESHOT42, MULTISHOT,
DSHOT150, DSHOT300, DSHOT600
Specifications: MCU: EFM8BB21F16G, ammeter: yes input: 2-6SLIPO
Mounting holes: 20X20 MM, M2
Target: J-H-30
Conventional: 25 amps
Peak: 35 amps
Size: 31 * 31MM (including power cushion)
Mounting hole: 20 * 20MM

Features
Mini F4V2.1 Flying Tower 2-6S
Mini F4V2.1 flight control
The newly released MINI V2.1F4 flight control system has been optimized overall.
The main welding port is upgraded to a terminal plug, which is convenient for pilots to disassemble and assemble.
The F405 MUC with MPU6000 gyroscope is optimized,
To get better flight performance. Built-in programmable RGB LED interface,
Used for external LED to set LED color, function and status. Built-in OSD chip,
Monitor flight data status at any time, with intelligent audio function; Features:
With SUBUS, SUMH, SUMD, SPEKTUMU1024 /
2048, XBUS, PPM receiver, etc. compatible;
LED light bar signal output port, adjust LED light through FC
The color and flashing pattern of the bar;
Voltage / amp monitoring port, check battery voltage (VBAT + port)
And current (CRT port) (requires additional ammeter);
Buzzer output port allows to connect external buzzer to FC,
To warn or notify flight status;


Flytower F3 Integrated OSD Mini Flight Control
 
Receiver configuration, when SBUS and DSM receiver input, please configure RX3 as the input interface.
 
The DSM receiver takes power from 3.3V.
 
The SBUS and PPM receivers take power from 5V.
 
Factory firmware: betaflight 3.1.0 OMNIBUS
 
 
First, equipped with MPU6000 F3 flight control acceleration faster response; integrated 5V 1A BEC, integrated OSD. (This version is 6DOF, no barometer and electronic compass)
 
1. This board provides all the features, weighs only 7.7g, fixed hole for the 20MM ( M2.5 hole );
2. For four-axis models tailored, built-in LC filter, support BF firmware;
3. Using STM32F3CCT6 single-chip 256K flash memory, MPU6000 sensor SPI interface connection, faster computing speed;
4. Support 2-4S power input;
5. Built-in 5V 1A output BEC;



Inquiry

INQUIRY NOW
  • * (All * must be filled in)

Related Products